Refurbishment Solutions
Case Study
We were presented with a JCB Loadall with excessive wear in the end of the boom & carriage tilt. The price of new parts were prohibitive expensive. So the solution was to repair or fabricate the required parts.
The hydraulic ram had the excessively worn |
|
The push link that had pulled apart was replaced with a newly manufactured part, again fitted with hardened steel bushes.
|
 |
The TIP link had the damaged pin holes welded & re-bored. The main boss on end of the boom was cut out and a newly manufactured Boss was welded in place. |
 |
All the pins were machined from
high quality carbon steels.
Completing the repairs this way saved the customer approx 50% on the price of using new parts.
